Lame de scie au carbure de tungstène de haute qualité
Informations de base
Modèle: 30x3.0x10x48T, 63x2.0x16x80T, 63x3.0x16x80T
Description du produit
N ° de Modèle: 30x3.0x10x48T, 63x2.0x16x80T, 63x3.0x16x80T Procédé de fabrication: Galvanoplastie Grade: Yl10.2, Yg15, Yg15X, Ys2t, Yg6X Taille: 30X3.0X10X48t, 63X2.0X16X80t, 63X3.0X16X80t Marque déposée: G & W Spécifications: toutes les dimensions Code SH: 8208101900 Type de lame: Tête de coupe Application: Hardwear Tolérance: Finition Grind, Poli miroir Pièce de travail: Bois dur, Bois recyclé, MDF, Métal Emballage: Boîte standard Origine: Zhuzhou, Hunan
yg6/K20 | For the cutting of ordinary wood, Recommend to use resistance welding,and the temperature should not be too high |
YG8/K30 | For the cutting of the ordinary wood,also for the aluminum, Recommend to use resistance welding,and the temperature should not be too high |
YK08/K40 | For the cutting of the recycling wood especially for some iron nails and stones in it, Recommend to use resistance welding,and the temperature should not be too high |
JX5/K20 | For the cutting of the hard wood/recycling wood and aluminum, Recommend to use resistance welding,and the temperature should not be too high |
YG6X/K10 | For the cutting of the wood specially, recommend to use the high frequency welding |
YG8X/K10 | For the cutting of the wood and aluminum specially, Recommend to use the high frequency welding |
K10S | For the cutting of the hard wood specially, Recommend to use the high frequency welding |
K20S | For the cutting of the aluminum specially, Recommend to use the high frequency welding |
K10UF | For the cutting of the plywood,board with middle to high density and the compound materials with aluminum and plasic, Use the high frequency welding |
K20UF | For the cutting of the aluminum specially, Use the high frequency welding |
K30UF | For the cutting of the stones specially, Use the high frequency welding |
R06 | For the cutting of the plywood,density board and the sandwich board, Use the high frequency welding |
R03 | For the cutting of the timber such as shaving board,laminated boar,density board and compound material etc, Use the high frequency welding |
YC40 | For the cutting of the large cast materials, Recommend to use the high frequency welding |
YC501 | For the cutting of the steel and the stainless steel, Recommend to use the high frequency welding |
Groupes de Produits : Lame de scie au carbure de tungstène
Premium Related Products
autres produits
Produits phares
Boutons à bouton carbure de tungstène à différentes taillesDisque de coupe rond en carbure Ys2t Yl10.2 Yg15XHigh Wear Risistance Tongsten Carbide Nozzles SGSConseils en scie à bois en carbure de tungstène Yg6 K10Broches en carbure de tungstène utilisées pour le pneu automobileBurres rotatives à carbure solide à haute qualitéAnneau en carbure de tungstène de haute qualité pour outilsConseils en carbure de tungstène pour outil de forageBille de carbure de tungstène Vente chaudeTungsten Carbide Stamping Dies Punching Dies Yg20c Yg25cLe fil de carbure cimenté fini est découpé avec un étui en acierBoutons de perçage à base de carbure cimentés Bouton d'exploitation minière Yk05Tungsten Carbide Strip Grade K10 / K20 / K30Inserts par brasure au carbure de tungstène K10 P10 M10HRC 45 50 60 2 Flutes Ball Nose Carbide End MillBarres de carbure de tungstène de haute qualité YL10.2 h6