Le fil de carbure cimenté fini est découpé avec un étui en acier

Modèle NO .: S13, R, W104, W105, etc. Matériau: Type de trou de carbure cimenté: Traitement de surface de moule rond: Polonais Certification: ISO Personnalisé: Types standard ou personnalisés: S11, S13, R, W104, W105, 6X4, 9X6, 16X13, etc. Paquet de transport: Boîte standard Origine: Zhuzhou, Hunan Type: Nib. De carbure de tungstène Mode de façonnage: Cavité de compression: Application multi-cavité: Matériel, appareils ménagers, Garantie électronique: 1 an: Yg3, Yg3X, Yg6, Yg6X, Yg8 , Yg11, Yg15 Marque déposée: Spécifications G & W: 34 x 17 x 14 cm Code SH: 82072090
1. Notre avantage
1 100% matière première
2 HIP Furnace frittered
3 Rectification de haute précision
4 Alésage jusqu'à 0.1mm
5 Produire des matrices finies avec boîtier en acier
6 Livraison rapide
7 Fabricant professionnel de produits en carbure de tungstène avec 20 ans d'expérience.
8 Système de contrôle de qualité complet et inspection rigoureuse.

2. Notre taille de moule
Type W
Type S11
Type S12
Type S13
Type 22
Type 23
Type S30
Type S40
Type S41
Type S42
Type S60
Type R

3. Recommandation de grade

Properties of grade
Grade	Density	Hardness (HRA)	TRS	Grain size
	(g/cm3)		(MPa)	(um)
YL01	15.25	93.5	3300	0.8
YL10.2	14.5	92	4000	0.8
YG6	14.95	90	2400	1.6
YG6X	14.95	91.5	1900	1
YG8	14.75	89.5	2800	1.6
YG11	14.4	87.5	3100	1.6
YG15	14.05	87	3000	1.6
Application recommended
Grade	Applications recommended
YL01	Used for drawing diameter less than 1.5 mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous metals with high requirement on surface finish.
YL10.2	Used for drawing diameter between 1.5 mm to 10mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous tubes with high requirement on surface finish.
YG6	Used for drawing the diameter less than 20mm of steel, nonferrous metals and its alloy wire or bar under a moderate stress. It also used for tubes less than diameter of 10mm.
YG6X	Used for drawing the steel wire, nonferrous metals and its alloy wire or bar under the requirement of good wear resistant.
YG8	Used for drawing diameter less than 50 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm.
YG11	Used for drawing diameter less than 60 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm.
YG15	Used for steel pipe and steel bar as well as alloy steel bolt and head forging of rivet under a certain big stress

Groupes de Produits : Matrice de dessin en carbure de tungstène